![forums.silverfrost.com Forum Index](templates/subSilver/images/logo_phpBB.gif) |
forums.silverfrost.com Welcome to the Silverfrost forums
|
View previous topic :: View next topic |
Author |
Message |
jjgermis
Joined: 21 Jun 2006 Posts: 404 Location: Nürnberg, Germany
|
Posted: Tue Dec 29, 2009 2:18 pm Post subject: Getting started with Simdem |
|
|
I am trying to work through the examples in Simdem package. However, after several attempts I cannot produce simdem.exe (probably for some trival reason). Below is the error message I get when trying to build simdem.exe. My questions :
(a) which dll's should be added as a reference (see list at bottom) and
(b) what does this error means?
Code: | Cleaning...
Clean completed.
Compiling file: simdem.for
Compiling file: runsim.for
Linking...
*** Multiple definition of symbol: _RUNSIM
H:\FTN95\Clearwin\simdem00\CheckMate\Win32\simdem.obj
(H:\FTN95\CLEARWIN\SIMDEM00\SIMDEM.FOR)
and,
H:\FTN95\Clearwin\simdem00\CheckMate\Win32\runsim.obj
(H:\FTN95\CLEARWIN\SIMDEM00\RUNSIM.FOR) |
Code: | "Files"
{
"simdem.for"
{
"ProjRelPath" = "T"
"CustomCompilerOptions" = "0"
"CustomSwitches" = ""
"ExcludeFromBuild" = "F"
"FileGUID" = ""
}
"runsim.for"
{
"ProjRelPath" = "T"
"CustomCompilerOptions" = "0"
"CustomSwitches" = ""
"ExcludeFromBuild" = "F"
"FileGUID" = ""
}
}
"References"
{
"C:\\Progs\\Simdem\\bin\\w_menus.dll"
{
"CopyLocal" = "F"
"ProjectRef" = ""
"IsProject" = "F"
"IsSTDCALL" = "F"
"ExcludeFromBuild" = "F"
"ReferenceName" = ""
"ReferencePath" = ""
}
"C:\\Progs\\Simdem\\bin\\w_graphics.dll"
{
"CopyLocal" = "F"
"ProjectRef" = ""
"IsProject" = "F"
"IsSTDCALL" = "F"
"ExcludeFromBuild" = "F"
"ReferenceName" = ""
"ReferencePath" = ""
}
"C:\\Progs\\Simdem\\bin\\w_clearwin.dll"
{
"CopyLocal" = "F"
"ProjectRef" = ""
"IsProject" = "F"
"IsSTDCALL" = "F"
"ExcludeFromBuild" = "F"
"ReferenceName" = ""
"ReferencePath" = ""
}
} |
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
PaulLaidler Site Admin
Joined: 21 Feb 2005 Posts: 7928 Location: Salford, UK
|
Posted: Tue Dec 29, 2009 3:40 pm Post subject: |
|
|
The primary problem is that you have subprograms that define _RUNSIM in both simdem.for and runsim.for. The underscore might be generated by FTN95/SLINK so you may have RUNSIM as the name. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
jjgermis
Joined: 21 Jun 2006 Posts: 404 Location: Nürnberg, Germany
|
Posted: Tue Dec 29, 2009 4:06 pm Post subject: |
|
|
I added runsim.for to the sources in the project explorer. This caused the problem since it is already included as include 'runsim.for' in simdem.for. Furthermore, the follwing dll's must be added in oder to work properly:
1) w_menus.dll;
2) w_graphics.dll and
3) w_clearwin.dll.
Another aspect to point out is that winapp is not included in the example code. This causes a dos box to appear in the background. Moreover, the executable seems to be dependant on the salflib.dll. When I use the shipped dll's with the simdem package, I have to use the shipped salflib.dll as well (not my current version on my PC). Is this correct? |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
PaulLaidler Site Admin
Joined: 21 Feb 2005 Posts: 7928 Location: Salford, UK
|
Posted: Tue Dec 29, 2009 8:19 pm Post subject: |
|
|
This all sounds right to me. You should always be able to use the most recent version of salflibc.dll. It your "current" version is older than the "shipped" version then you may need to use the "shipped" version. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
jjgermis
Joined: 21 Jun 2006 Posts: 404 Location: Nürnberg, Germany
|
Posted: Wed Dec 30, 2009 12:56 pm Post subject: |
|
|
Hi Paul,
ok, everthing seems to work now. Reading through the forum I was reminded of simpleplot (so I downloaded the manuals). After working through a few examples I think that for my current problem (draw_filled_polygons in another thread) simpleplot might be easier than using simdem.
I only want to plot the polygons/mesh to see if the data is consistent, i.e. quick and dirty. Since I have no experience with this, my progress is rather slow and the only place to get information is the forum. What do you suggest: simpleplot or simdem? My simpleplot solution for a drawing the polygons is shown below. I only (seems easy, but I do not know how) need to fit it to the axis. Am I on the right track?
Code: | winapp
PROGRAM VIS01
REAL Z(50,50)
real x_ply(50),y_ply(50),xarr(50),yarr(50)
INTEGER I,J,IU
C
CALL VSVRTP(0.0,0.0,90.0)
CALL VSNEW ! ViSualization NEW picture
Z = 0.0
C
iu = 99
open(unit=iu,FILE='aa.pol')
rewind iu
read (iu,*) nseg_pol
do i=1,nseg_pol
read (iu,*) nspnts_pol,nstype_pol
do j=1,nspnts_pol
read (iu,*) x_ply(j),y_ply(j)
xarr(j)=x_ply(j)*4.0
yarr(j)=y_ply(j)*4.0
end do
CALL VSPGFL(xarr, yarr, Z, nspnts_pol)
end do
CALL VSOUT
close(unit=iu)
CALL ENDPLT
END |
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|