View previous topic :: View next topic |
Author |
Message |
offthechart
Joined: 04 Dec 2013 Posts: 17
|
Posted: Mon Jun 22, 2020 10:48 pm Post subject: |
|
|
OK Mr. C and mecej4, here is some info.
First I created ftn95.cfg (I have never had one created) with options;
/BRIEF
/ERRORLOG
/LIST
Then compiling on the Command line I get a file created on disk -- filename.lis
It has my 2 induced errors and prints out a file with the full source code and:
0022 write(6,"(' Enter the 1" in. aluminum disk radius (in): ',$)")
ERROR C:\...\tempnewsilverfrst\filename.F 22: Unterminated character constant
and also,
0079 do i = 1,..ltot-1
ERROR C:\......\tempnewsilverfrst\filename.F 79: There is no declaration for user-defined operator '..'
Success.
Note that it takes, ftn95 filename.f/brief to get line numbers showing up in the Command prompt window. Otherwise my Command window does not display error line numbers.
Otherwise, I do not know exactly what else you might wish to see. I am not well versed in the ins and outs of compiler operation. I am a retired (13 years) engineer that specialized in structural dynamics, spectral analysis and finite element theory. I wrote many thousands of lines of code to turn physics into numbers. I still enjoy writing. Thanks for your help. If you need more info I will try. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
John-Silver
![](http://i.postimg.cc/K8HMTnXq/Bart-Unrivalled-Native-Plotting256.jpg)
Joined: 30 Jul 2013 Posts: 1520 Location: Aerospace Valley
|
Posted: Tue Jun 23, 2020 12:16 am Post subject: |
|
|
Try WITHOUT the /ERRORLOG and WITHOUT /LIST and see what is produced in the command line window _________________ ''Computers (HAL and MARVIN excepted) are incredibly rigid. They question nothing. Especially input data.Human beings are incredibly trusting of computers and don't check input data. Together cocking up even the simplest calculation ... " |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
JohnCampbell
Joined: 16 Feb 2006 Posts: 2554 Location: Sydney
|
Posted: Tue Jun 23, 2020 9:04 am Post subject: |
|
|
I am having trouble understanding this thread.
I can not reproduce your problem with the line of code identified producing an error message as you describe or failing to identify the line number.
My example code (which hopefully identifies a fix to your problem is Code: | write(*,"(' Enter the 1" in. aluminum disk radius (in): ',$)")
write(*,"(' Enter the 1"" in. aluminum disk radius (in): ',$)")
end |
I went back to FTN95 Version 7.00 and used the compile option
my ftn95.cfg file is Code: | /ERROR_NUMBERS
/IMPLICIT_NONE
/INTL
/LOGL |
The compiler response is Code: | [FTN95/Win32 Ver. 7.00.0 Copyright (c) Silverfrost Ltd 1993-2013]
Licensed to: John Campbell
Organisation: xxxxxxxxx
0001) write(*,"(' Enter the 1" in. aluminum disk radius (in): ',$)")
*** Error 70: Unterminated character constant
1 ERROR [<main program> FTN95/Win32 v7.00.0]
*** Compilation failed |
If I use ftn95 filename.f /brief, I get Code: | [FTN95/Win32 Ver. 7.00.0 Copyright (c) Silverfrost Ltd 1993-2013]
Licensed to: John Campbell
Organisation: xxxxxxxxx
ERROR c:\temp\filename.F 1: 70: Unterminated character constant
1 ERROR [<main program> FTN95/Win32 v7.00.0]
*** Compilation failed |
In both cases, line 1 is identified as the error line.
Without /brief, the error line of code is identified and listed.
By including /brief /errorlog, the error is also listed in filename.ERR as: Code: | ERROR c:\temp\filename.F 1: 70: Unterminated character constant |
The line number is always identified.
Also, what is "do i = 1,..ltot-1" ?
Is .. copying PLATO's representation of 2 blanks ?
Quote: | Otherwise, I do not know exactly what else you might wish to see. I am not well versed in the ins and outs of compiler operation. I am a retired (13 years) engineer that specialized in structural dynamics |
We would like to see the code, so we could attempt to reproduce your problem. I am also an engineer that specializes in structural dynamics so I don't think that relates to the problem being reported. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
offthechart
Joined: 04 Dec 2013 Posts: 17
|
Posted: Tue Jun 23, 2020 4:25 pm Post subject: |
|
|
John C. I intentionally created the errors to check compiling! I realize there should not be .. in the do statement. /brief cures the problem. Without it, the command window does not give line numbers for errors. My previous post of yesterday explains the solution with creation a .CFG file that listed all source code with errors (in filenam.lis) displayed following the incorrect code statement. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
John-Silver
![](http://i.postimg.cc/K8HMTnXq/Bart-Unrivalled-Native-Plotting256.jpg)
Joined: 30 Jul 2013 Posts: 1520 Location: Aerospace Valley
|
Posted: Tue Jun 23, 2020 6:18 pm Post subject: |
|
|
the source of your observed 'no line number' can only be due to the presence of /ERRORLOG and/or /LIST
Try what i uggested previously above to try to pinpoint it _________________ ''Computers (HAL and MARVIN excepted) are incredibly rigid. They question nothing. Especially input data.Human beings are incredibly trusting of computers and don't check input data. Together cocking up even the simplest calculation ... " |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
offthechart
Joined: 04 Dec 2013 Posts: 17
|
Posted: Tue Jun 23, 2020 6:47 pm Post subject: |
|
|
Yes John Silver. I removed both options you noted and the compile error line number did show up in the Command window. The only option in my .cfg file was reduced to /BRIEF However without /BRIEF, the line number does not show up in the Command window. Oh well. I am quite satisfied I have a working method to obtain useful error messages. Thanks for the inputs. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
JohnCampbell
Joined: 16 Feb 2006 Posts: 2554 Location: Sydney
|
Posted: Wed Jun 24, 2020 3:51 am Post subject: Re: |
|
|
offthechart wrote: | However without /BRIEF, the line number does not show up in the Command window. |
I do not agree with this claim. The offending line + line number appears without /brief.
My experience is that it is preferable to not use /brief and until a working example is provided to demonstrate line numbers are not provided, I would recommend ignoring ofthechart's recomendations.
( I prefer to also use /ERror_numbers to better identify the errors and warnings. It is also useful, should use of /IGnore be required ) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
mecej4
Joined: 31 Oct 2006 Posts: 1885
|
Posted: Wed Jun 24, 2020 10:33 am Post subject: |
|
|
I agree with John C's comment, with one caveat: the next-to-zero chance that Offthechart's licensed version of FTN95 7.0 hides line numbers whereas the personal versions of 6.35, 7.0, 7.2 and 8.62 that I used do not hide line numbers. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
offthechart
Joined: 04 Dec 2013 Posts: 17
|
Posted: Wed Jun 24, 2020 4:01 pm Post subject: |
|
|
OK gang, here goes for the last time. For whatever &^$^* reason, /ftn95 filename.f in my command window does not show error line numbers. I am not an unobservant idiot. As a previous long time analyst in the defense world and member of the Triplenine society, not much gets by me.
Get it? I don't know why, but that is what occurs when I compile. When I add /BRIEF line numbers show up in the command window. Great. When I create a ftn95.cfg file with /LIST included I get a full source file printout (filename.lis) with the error message following each errant statement. Excellent. I don't have the slightest idea about the inner workings of the maze named Silverfrost, but in general I am quite pleased with it.
I do not have a licensest version as I only create code at home when the desire strikes me. For example, a retired math friend wished to solve polynomial equations with complex coefficients. I discovered the Laguer method and successfully coded it. Or a barroom question: I wonder how much farther a home run travels in Denver versus San Francisco? Having discovered Internet data on drag and lift (Magnus) coefficients, off I went into the land of numerical integration. Keeps my 75 year-old mind working. Thanks for help y'all. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
JohnCampbell
Joined: 16 Feb 2006 Posts: 2554 Location: Sydney
|
Posted: Thu Jun 25, 2020 3:39 am Post subject: |
|
|
OK ofthechart, here goes for the last time!
Can you:
# generate a minimum reproducer: filename.f,
# a .bat file that demonstrates the different performance which looks like below then
# run the .bat to display the different error report formats,
# attach the relevant files to help identify the problem.
Code: | dir > filename.tce
ftn95 filename.f "bad options that omit the line numbers" /echo >> filename.tce
ftn95 filename.f "good options that include the line numbers" /echo >> filename.trace
dir >> filename.tce |
Could you also list the .bat, .tce and ftn95.cfg, or preferably include these in a .zip file, together with filename.f and best provide this as a lnk to dropbox or similar.
It would be best to provide filename.f as a link, so we can inspect the .f file for any unexpected characters that may be causing the problem (eg for unix or other non Dos/ansi characters)
I have already suggested a way of eliminating the error, should that be a useful way forward.
It would be good to get an explanation for this behaviour.
John |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
offthechart
Joined: 04 Dec 2013 Posts: 17
|
Posted: Thu Jun 25, 2020 5:47 pm Post subject: Errors etc. |
|
|
Hello JohnC. First I appreciate your knowledgable technical concern (and curiousity). Thinking upon the problem last night, there is a possible variable that affects the default error message 'problem'. I utilize a particular text editor for the creation and editing of most files, including Fortran source code. Of course, I have set up my editor to make editing life easier with various 'hot keys'. I have not utilized the specialized .F editing program that is available to create code.
I don't know if this is significant but my my understanding of Murphy's Law makes me suspicious. I could send you the source code text, but doubt it would be of value. ( I wrote it as a generic method for a friend who needed to know the response of a disk to intermittent torque pulses and the effects of static friction. It was up to him to modify it in any way for his particular purposes.)
Below is a file "fvars.bat" that has existed on disk since I downloaded the compiler. I question its value to you also. Thanks.
@echo off
echo.
echo Setting Environment for FTN95 for Microsoft .NET and Win32
echo.
SET PATH=C:\Windows\Microsoft.NET\Framework\v2.0.50727\;%PATH%
SET PATH=C:\Program Files (x86)\Silverfrost\FTN95;%PATH%
SET F95INCLUDE=C:\Program Files (x86)\Silverfrost\FTN95\Include
SET MOD_PATH=C:\Program Files (x86)\Silverfrost\FTN95\Include |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
John-Silver
![](http://i.postimg.cc/K8HMTnXq/Bart-Unrivalled-Native-Plotting256.jpg)
Joined: 30 Jul 2013 Posts: 1520 Location: Aerospace Valley
|
Posted: Thu Jun 25, 2020 7:00 pm Post subject: |
|
|
a stupid suggestion but a quick check to see if it's anything to do with using a ;cfg file ...
Try temporarily 'deleting' the .cfg file (by modifying the extension with some crazy arbitrary text for example,
... then run your prog from command line and see what happens. _________________ ''Computers (HAL and MARVIN excepted) are incredibly rigid. They question nothing. Especially input data.Human beings are incredibly trusting of computers and don't check input data. Together cocking up even the simplest calculation ... " |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
offthechart
Joined: 04 Dec 2013 Posts: 17
|
Posted: Thu Jun 25, 2020 9:28 pm Post subject: |
|
|
I did that. With an induced error I got in the command window:
*** unpaired right brackets
1 error [ <main program> ftn95/win32 v7.00.0]
*** compilation failed
As usual, nothing more. It's only the .cfg file that gives me the correct line numbers help that is needed! At least I have a solution to the problem by using a .cfg file. When I use a .cfg file I get:
error C:\.............\filename.f 22: unpaired right brackets
1 error [ <main program> ftn95/win32 v7.00.0]
*** compilation failed
Note the line number '22'. !! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|