|
forums.silverfrost.com Welcome to the Silverfrost forums
|
View previous topic :: View next topic |
Author |
Message |
dfwlms
Joined: 04 Jan 2005 Posts: 20 Location: Huntsville, Alabama
|
Posted: Tue Dec 13, 2016 7:08 pm Post subject: Graphics Failure with Windows 7 Professional |
|
|
The latest version of my conceptual design and analysis program for rockets and their missions fails to display portions of the GUI on a user's computer with a 64-bit Windows 7 Professional operating system. Earlier versions of the program execute properly on his machine. It appears that commands such as "draw_filled_rectangle@(...)" and "draw_line_between@(...)", etc., are not now being executed with the latest program version.
There are no substantive changes in the graphics commands between the latest program version and earlier program versions, which produced no problems for the user (he's in another country).
I develop the program on a 64-bit Windows 7 Home Premium computer, and the program is checked out on this computer and on a 32-bit Windows XP computer and a 64-bit Windows 10 computer. I don't have access to a 64-bit Windows 7 PROFESSIONAL computer, so I can't verify the user's problem.
If anyone has a 64-bit Windows 7 Professional computer, I would much appreciate it if you could download the ZOOM program (version 1612) from the following web page:
http://trajectorysolution.com/ZOOM%20Program.html
If you download and run the program, and if you have the same problem as the ZOOM user, drawings of the rocket will not be present, among other things. If everything appears OK, then there is something unique about the user's computer (I can't imagine what).
Thanks for any assistance or suggestions. _________________ David Williams
Retired Aerospace Engineer
Huntsville, Alabama |
|
Back to top |
|
|
JohnCampbell
Joined: 16 Feb 2006 Posts: 2593 Location: Sydney
|
Posted: Wed Dec 14, 2016 11:52 am Post subject: |
|
|
I suggest you review C:\Program Files (x86)\Silverfrost\ftn95\doc\cwplus.enh
Code: | 345) The default %gr colour mode has been changed from VGA to RGB. To use the old VGA colours, call set_rgb_colours_default@(0) or call the function use_rgb_colours@(handle,0) for a given %gr handle. The option %gr[rgb_colours] now becomes the default whilst the new option %gr[vga_colours] restores old. This change applies for clearwin_version@() >= 7001000.
Old executables that use VGA colours can use the new DLL without being rebuilt but, when they are rebuilt, the code must be changed to accommodate the change before using the new DLL. |
I anticipate this may relate to your problem. This occurred at about Ver 7.00.
The solutions are to either select VGA colours ( at %gr) or use RGB colour values.
I would recommend moving to RGB colours, but you may find that VGA colours suit your requirements,
John |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|